When pig farmers in very remote areas choose the leakage board, both the manufacturer and pig farmers will not hesitate to choose the leakage board mold, because it is difficult to transport, and the freight is more expensive than the goods. There are also farmers in order to save money and long-term use, will also choose to leak dung plate mold, buy back to make their own. But often in the production process, there will be some problems. What should I pay attention to when making cement leakage board?

1. The mold must be vibrated evenly with a vibration platform, which can be made by yourself or purchased from the manufacturer. The vibrator is only a regional type and is not suitable for mold vibration.

2. Before pouring the cement into the mold, it is necessary to spray waste engine oil or release agent.

3. The steel mesh must be placed in two layers. Do not put one layer of steel mesh in order to reduce the cost, so the bearing capacity of the leakage slab can not reach the standard bearing capacity.

4. It must be covered with tarpaulin with color to prevent moisture evaporation and crack.

5. The storage time must be 24 hours in summer and 48 hours in winter. Don't be eager.

6. After the mold is demoulded, it must be maintained with water for 3-7 days, and then put into the pigsty for use. If the mold is not used, it should be stored in a cool place, and it should not be exposed to the sun or rain.

  The above-mentioned are the matters that should be paid attention to when making the cement fecal leakage board with the fecal leakage board mold. I hope it can help the breeding friends. If you need to know the details, please go to the product center of the website for details. If you have any questions, please call or leave a message.