The application of cement leakage board mold:

 1. First place the mold on the vibration platform, then spray mold release agent, waste oil or hydraulic oil inside the mold, easy to release.

 2. Put the corresponding double-layer steel mesh in the mold. 

3. The concrete is divided by 6 according to the weight of the finished product, and then the material is cut according to the proportion of 1:2:3, 1 cement, 2 big sand and 3 stones. The mixed concrete should not be too thick or too thin, moderate. 

4. Then open the vibration platform and pour the concrete in proportion into the mold.

 5. After the filling is complete, the mold is then placed flat and covered with a tarpaulin with color to prevent moisture from evaporating too fast. 

6. 48 hours in winter and 24 hours in summer, mainly determined by local temperature. 

7. After waiting for forming, the board surface will be downward, lifted and placed on the old tire for several times, which can be demoulded successfully, and then watered and maintained for 3 days.

  The advantages of the cement leakage board mold: 1. The cost can be controlled in production. For the farmers, it is very important to control the cost in production, which determines that the control of investment and expenditure is in their own hands. At the same time, its function can not only produce the water mud leakage board, but also repair the damage of the cement leakage board, which greatly saves the cost for the company The flow of funds created a lot of space. 2. The mold is made of pure white engineering polypropylene. In the process of injection, we add a little silicone oil in it, so the mold is easier to demould. 3. The product quality is good, because the mold is one-time injection molding, uniform stress, good toughness. 4. All the corners are rounded, and the leakage hole is designed as trapezoid, small on the top and large on the bottom, which is convenient for leakage without damaging pig's hoof. 5. The stiffener with thick edges and corners is designed with single mold, which is convenient and quick to demould. It is not easy to crack and not damaged in use, and has a long service life.