The mould of leakage board of Henan Guangjian Animal Husbandry Machinery Co., Ltd. is made of Engineering polypropylene material by injection molding machine and extrusion machine at one time. It has the characteristics of wear resistance, corrosion resistance, not easy to crack, easy to demould, etc. The ones below 1.5m are all formed by 1600t injection molding machine. More than 1.5m (including 1.5m) is made by extrusion machine with high temperature and pressure. It can be used more than 1000 times. And the specifications are complete, the width is 0.6 meters, the length is 1.05 meters, 1.1 meters, 1.3 meters, 1.5 meters, 1.8 meters, 2.0 meters, 2.2 meters, 2.4 meters, 3.0 meters. The thickness is determined by the length of the mold, the longer the thickness, the thicker. The minimum thickness is also 1.05 × 0.6m, with a thickness of 5.5cm. The thickest one is 3.0 × 0.6m, and the thickness is 11cm. However, the thickness of the fecal leakage plate will be 0.5cm. There will be an error of 0.2cm in length and width. Therefore, there will be some errors in the fecal leakage plate. Our factory not only has the plastic leakage plate mold, also has the cast iron leakage plate mold.

Price is also an unstable price.

1. Our factory is a direct selling factory, which saves the difference between middlemen.

2. Mold is also determined by the price of specifications, the longer the size, the price will certainly change.

3. Our factory also determines the price of the mould according to the fluctuation of the raw materials. Because our factory sells by volume and the workers work by piece, only the price of the raw materials controls the price of the finished products.

4. If there is a fluctuation of raw materials, the price fluctuation of finished products will not be particularly large. Generally, the fluctuation is 10-20 yuan.

  If you need to inquire about the specific price of the mold, please consult: 17630188036 (manager Wei) untitled-2 untitled-1