At present, the domestic pig industry is not unfamiliar with the cement leakage board. The extensive use of the cement leakage board must be inseparable from its powerful function. However, due to many remote places, when transporting the cement leakage board, the freight is too expensive. So many manufacturers for these remote areas, want to produce their own cement leakage board customers, all sold to customers mold. But after all, the mold is plastic. Over a long period of time, many customers have reported that the mold is deformed, difficult to demould, and has to knock the mold with a leather hammer when demoulding.

  In order to solve the problems of difficult demoulding and mold deformation, Henan Guangjian Animal Husbandry Machinery Co., Ltd. successfully solved the problems reflected by customers after repeated production experiments. The company will do before the Chinese leakage plate mold to a new thickened European leakage plate mold. 1.05M, 1.1m, 1.5m, 2.0m, 2.2M, 2.4m and 3.0m new European manure leakage plate mold.

  The appearance of this mold successfully solved the problems reported by customers. Before the raw material engineering polypropylene was put into the extruder, a little silicone oil was added to the mold, which was easy to demould without knocking during demoulding. Moreover, the new thickened material is used to solve the problem that the die does not deform. When the two plates are spliced together, a new leakage hole will be formed. Especially the 3-meter, 2.4-meter and 2.2-meter moulds were once praised by customers. Due to the characteristics of small investment, high production efficiency and convenient production, the production efficiency of the construction site has been greatly improved, and the disadvantages of the previous mechanical production line such as bulkiness and slow production have been completely changed. Moreover, the biggest advantage of the mold is that it can perfectly control the production cost.